Short name: Wire Mode
Requires: Base Development System
Classes: Instr, Serial Instr
Specifies the current wire/transceiver mode. For RS485 hardware, this property is valid only with the RS485 serial driver developed by National Instruments. For RS232 hardware, the values RS232/DCE and RS232/AUTO are valid only with RS232 serial drivers developed by National Instruments and documented to support this feature with the corresponding National Instruments hardware. When this feature is not supported, RS232/DTE is the only valid value.
| -1 | Unknown |
| 0 | RS485/Wire4 |
| 1 | RS485/Wire2-EchoDTR |
| 2 | RS485/Wire2-CtrlDTR |
| 3 | RS485/Wire2-Auto |
| 128 | RS232/DTE |
| 129 | RS232/DCE |
| 130 | RS232/AUTO |
The following table lists the characteristics of this property.
| Data type | |
| Permissions | Read/Write |